All installations should be made on perfectly flat, smooth surface free of dust, bumps and reliefs. If the installation is made on a metallic surface, make sure that it is not oxidized when cleaning properly with sandpaper or solvents.
Also make sure that the surface used for panel installation is perfectly clean and dry and without any moisture problems. If the panels are used in damp environments with plasterboard walls, gypsum plaster, concrete plaster or marine plywood, it is recommended to filter the surface with an easily identifiable product such as Mapei WPS Magegum or similar product.
For the perfect installation of the panels, it is recommended to use qualified installers.
A professional tiling, marble or mosaic installer is recommended.
N.B. Emac produce small profile secretly designed to protect and decorate the edges and the corners.
When installing, it is recommended to use single-component polyurethane adhesive products, resistant to moisture and thermal resistant.
Mainly, there are several quality products suitable for this purpose that can be easily found in all countries of the world such as: LIQUID NAIL – BOSTIK – TRADE FIX or PLANICRETE W by Mapei (in the rest of the world it is called KERALASTIC T) or similar products.
The adhesive must be spread evenly on the wall using a toothed spatula. The artwork can be applied and locked in place by applying pressure with the palm of the hand.
Cuts and drilling adjustments on site:
First, it is always essential to make all the cuts on the back of the panels to prevent chipping or peeling of the epoxy resin. Small and large cuts can be made using professional machines such as the ROUTER-PANEL SAW WALL SYSTEM CNC system.
Better yet is to use a TABLE SAW with a fine tooth laminate grade blade to prevent chipping of the epoxy resin.
Lastly, if the case requires small cuts a simple SCORING KNIFE BLADE can be used.
To make holes to the panels in case you needed to install shower fixtures we recommend using a HOLE SAW for metal or a regular drill that will allow you to make several small hole so that the epoxy resin will not chip or break.
To make holes to the panels in case you needed to install shower fixture or any else we recommend using a HOLE SAW for metal or a regular drill that will allow you to make a several small hole so that the resin will not chip or break.
Maintenance and cleaning:
The surface of the panel does not require special maintenance. The epoxy resin covering the panel is very durable and completely waterproof. We recommend that you do not use any abrasive products to prevent possible scratching of the panel. In the market you will find a lot of suitable products; we particularly recommend using the same products you would use to clean glass surfaces.
We strongly recommend that you DO NOT USE bleach or thinners of any similar products.
To keep the panels beautiful we recommend using a microfiber cloth.
Complete Customization of the Biocompability and Ecological Fast replies and execution A quick and efficient Customer
Graphic Service for a tailor-made
features of the materials
Complete Customization of the
Biocompability and Ecological
Fast replies and execution
A quick and efficient Customer